An error message is displayed when
the mobile phone is powered on
If the automatic lock function is
enabled, you must enter the phone
password before you use the
mobile phone (default password
0000).
If the PIN function is enabled, you
must enter the PIN code every
time you turn the mobile phone on
(default PIN code 0000).
If you have entered the wrong PIN
code three consecutive times the
mobile phone will lock. To unlock it
you must enter the PUK code
provided by the network carrier.
SIM card error
If the chip on the SIM card is dirty
or damaged it can impact the
phones ability to read the SIM card.
Please clean/replace as required.
Please ensure the SIM card is
To Next Page
Loading...
