Oliver 2005 User Manual

2005 VARIABLE THICKNESS BREAD SLICER
2005S20005 5-3
Manual Diagnostic and Set-Up Mode:
The machine may be put into Manual Diagnostic Mode to check several functions of the
machine. To enter this mode, simply do the following:
 Wait for the initial screen to come up (pusher must be in the home position, and may
take up to a minute) or cycle the power switch to bring up the initial screen.
 Press on the Varislice logo on the touch screen for about 20 seconds until the screen
changes.
 There are several rectangular buttons on the touch screen display to activate the
different actuators and colored (red/green) circle indicators to verify the switch
function on the machine as follows:
1. FWD and REV buttons move the pusher back and forth. (The covers must
be closed to allow movement).
Moving the pusher can verify the smoothness of the pusher travel and can be
used to test the switches on each end of the travel by observing the “end
switch” indicator (right end) and “home switch” indicator (left end).
2. The BLD button starts the blade rotation. (The covers must be closed to allow
movement).
3. The ARM button engages the arm motor and clutch to move the blade arm up
and down. (The covers must be closed to allow movement).
Moving the arm will activate the switch at the top of the arm travel. The
function of this switch can be verified by observing the “ARM SWITCH”
indicator as the arm returns upward.

Oliver 2005 Specifications

General

Brand	Oliver
Model	2005
Category	Kitchen Appliances
Language	English