To Next Page

To Previous Page

690-NC2

0690S20044 5-2

11. Display will show

for stage 2 time. Stage 2 only works for menus 01-20

(For menus 21-40 skip to the Pre-alarm). Use up and down keys or keypad to enter

the time in whole minutes. Entering 0 will eliminate stage 2 and skip you past the

rest of the stage 2 parameters. Press ‘next’ key to advance.

12. Display will show

for stage 2 Temperature. Use up and down keys or

keypad to enter the Temperature. Press the ‘next’ key to advance.

13. Display will show

for stage 2 fan. Use up and down keys to scroll between

Hi and Lo fans. Press ‘next’ key to advance. Best results are achieved with the fans

on HI.

14. Display will show

for Pre-Alarm. Use the up and down keys to select the

Pre-Alarm in whole minutes (0 to 30). Example: A pre alarm value of 1 will sound an

alarm 1 minute before the time expires. Press ‘next’ key to advance.

15. Display will show

for Vent. Use the up and down keys to scroll closed,

open or 1-14 minutes. Venting example: A vent time of one minute will make the

vent open one minute before the end of the menu program. Press ‘next’ key to

complete program and return to the menu prompt.

16. Enter the next menu number to be programmed or press cancel to leave

programming mode.

Oliver NC User Manual

Questions and Answers: