690-NC2
0690S20043 4-5
Set temp. Use and to scroll to 380.
Press to go back to ‘Time or Idle’.
Adding Steam
It is possible to inject steam at any time the door is closed by pressing and holding the
7/steam button
.
Opening and Closing the Vent
It is possible to toggle the vent open and closed by pressing the 8/vent key
. This
will not work when a program is running. Use this feature to vent some of the steam out
of the oven before opening the door. However, some hot steam will always remain.
CAUTION
SUPER HEATED STEAM IS INVISIBLE AND IS POSSIBLY PRESENT IN THE OVEN.
THIS STEAM MAY BURN SKIN. STAND AS FAR AS POSSIBLE AWAY FROM
OVEN WHEN OPENING THE DOOR. THEN PROCEED WITH CAUTION.
Changing the Fan Setting
The fan cannot be changed when a program is running.
To Next Page
Loading...