To Next Page

To Previous Page

d-COLOR MF3100 5-3

5.1 Preparation for network connection (for administrators)

5 Initial Settings of This Machine

5.1 Preparation for network connection (for administrators)

Checking a LAN cable for connection

Check that a LAN cable connected to the network is connected to the LAN port of this machine.

For details on the cable connection port, refer to page 3-4.

Assigning an IP address

If this machine has a fixed IP address, manually enter the IP address, subnet mask, and default gateway ad-

dress.

In the Control Panel, select [UTILITY] - [Admin Settings] - [ETHERNET] - [TCP/IP] - [IPv4 Settings], then con-

figure the following settings.

Tips

- To check the IP address assigned to this machine, print out the Configuration Page. To print out the

Configuration Page, select [REPORT/STATUS] - [REPORT] - [Configuration Page] on the main screen.

Settings Description

[IP ADDRESS] When manually specifying the IP address, enter the fixed IP address assigned

to the machine.

[SUBNET MASK] When manually specifying the IP address, enter the subnet mask.

[DEFAULT GATEWAY] When manually specifying the IP address, enter the default gateway.

[IP App Auto Setg] When automatically specifying the IP address, select the method for automatic

retrieval.

• [DHCP]: [ON] is specified by default.

• [BOOTP]: [OFF] is specified by default.

• [ARP/PING]: [OFF] is specified by default.

• [AUTO IP Settings]: Fixed to [ENABLE].

Olivetti d-COLOR MF3100 Quick Guide

Other manuals for Olivetti d-COLOR MF3100