Olivetti d-COLOR MF3100 Quick Guide

d-COLOR MF3100 6-9
6.2 Using the scan function
6
6.2.2 How to scan
1 Load the original.
2 Press the Scan key.
3 Specify the destination.
% You can select the desired destination from the pre-registered destination list, or directly enter des-
tination information. For details on how to register a destination, refer to page 6-17.
4 Specify scan transmission options.
% On the main screen (Scan mode), press the + or , key to select the setting you want to change.
5 Press the Start key.
% To scan in color, press the Start (Color) key. To scan in black and white, press the Start (B&W) key.
% If you press the Stop/Reset key while scanning the original, scan processing stops, and the confir-
mation screen appears to check whether you wish to cancel the job. To stop sending, cancel the
job.
Sending starts.

Olivetti d-COLOR MF3100 Specifications

General

Brand	Olivetti
Model	d-COLOR MF3100
Category	Copier
Language	English