5-4 d-COLOR MF3100
Loading the original into the ADF
5
5.1
Loading the original into the ADF
The ADF feeds original sheets one by one in order from the top, and automatically loads them. It also loads
a 2-sided original automatically.
The ADF is helpful when loading a large number of original.
1 Put the first page of an original at the top, and load the original into the Document Feed Tray with the
side to be photocopied facing upward.
% Load the original so that its top side is placed at the back. When loading in a different orientation,
be sure to specify the loading direction of originals.
NOTICE
Do not load more than 50 sheets at a time into Document Feed Tray, and do not load the sheets up to
the point where the top of the stack is higher than the
,
mark. Doing so may cause the originals to jam,
damage the originals, and/or cause ADF failure. However, if the original contains more than 50 pages,
it can be scanned separately.
2 Slide the Document Guide to fit the loaded original.
To Next Page
Loading...
Need help?
General