50
EXPOSURE ADJUSTMENT/PHOTO COPYING
Exposure adjustment
Copy density adjustment is not required for most originals in the automatic exposure
mode. To adjust the copy density manually or to copy photographs, the exposure
level can be adjusted in two steps manually.
1
Press the exposure mode selector key to
select the MANUAL ( ) mode or PHOTO
( ) mode.
2
Use the light ( ) and dark ( ) keys to
adjust the exposure level. If exposure level 2
is selected, the two left-handmost indicators
for that level will light up simultaneously.
Also, if level 4 is selected, the two right-
handmost indicators for that level will light up
simultaneously.
The copy resolution used for AUTO and MANUAL ( ) mode can be
changed. (p.56)
To Next Page
Loading...
Need help?
General