To Next Page

To Previous Page

REDUCTION/ENLARGEMENT/ZOOM

Three preset reduction ratios and two enlargement ratios can be selected. The zoom

function enables copy ratio selection from 25% to 400% in 1% increments.

Set the original and check the paper size.

Use the copy ratio selector key and/or zoom ( , ) keys to

select the desired copy ratio.

Set the reduction/enlargement ratio.

To select a preset copy ratio:

Preset reduction and enlargement ratios are:

25%, 70%, 86%, 141%, and 400%.

To select a zoom ratio:

When a zoom (

or ) key is pressed, the

Zoom indicator will light up and the zoom ratio will

be displayed in the display.

•

To verify a zoom setting without changing the zoom ratio,

press and hold down the copy ratio display (%) key. When the

key is released, the display will return to the copy quantity

display.

•

To reset the ratio to 100%, press the copy ratio selector key

repeatedly until the 100% indicator lights up.

To decrease or increase the zoom ratio rapidly, press and hold

down the ( ) or ( ) key. However the value will stop at the

preset reduction or enlargement ratios. To move beyond these

ratios, release the key and then press and hold it down again.

141

Olivetti D-COPIA 120D User Manual

Questions and Answers: