Olivetti d-Copia 201D User Manual

39
4
Flow of the Button Manager setting
The Button Manager can directly handle a d-Copia 200D/201D series device event
and start your selected application according to the scan setting made on the
d-Copia 200D/201D operation panel (SC1, SC2, SC3, SC4, SC5, SC6).
This will scan directly into your application from the device.
The settings for the Windows Event Manager for
the OLIVETTI
d-Copia 200D/201D device
allow the user to take advantage of the
OLIVETTI Button Manager to take control of
events from Windows and send scanned images
to any application that can be selected in Button
Manager.
This can be done with the Windows OS showing
the Event Manager selection dialog or directly
into a selected application if the Button Manager
is the only allowed handler for device events
from the settings for the Windows Event
Manager for the OLIVETTI
d-Copia
200D/201D
.
This is done by changing the Windows device
settings for the settings for the Windows Event
Manager for the
d-Copia 200D/201D in the
Scanner and Camera device settings in the Control Panel.
Scanner
SCAN key
pressed.
Event
Manager
Windows OS
Button
Manager
No Selection
dialog is
displayed.
User
selected
application
The user
application
opens.
This is the Control Panel
Properties dialog for "Scanners and
Cameras".
The d-Copia 200D/201D is shown
selected.
OLIVETTI d-Copia 200D/201D

Olivetti d-Copia 201D Specifications

General

Brand	Olivetti
Model	d-Copia 201D
Category	All in One Printer
Language	English