Olivetti d-Copia 283MF Plus - Pause and Resumption of Jobs; Canceling of Jobs

Status / Job Cancel
OPERATION GUIDE 7-19
7
Pause and Resumption of Jobs
Pause /resume all printing jobs in printing/waiting.
The procedure for pausing and resuming jobs is explained below.
1 Press the Status/Job Cancel key. The Status
menu appears.
2 Press the U or V key to select [Print Job Status].
3 Press the OK key. Print Job Status appears.
4 Press [Pause] (the Left Select key). Printing is
paused.
When you press [Resume] (the Left Select key) to
resume printing.
NOTE: When you press the Back key, a confirmation
screen appears. Press [Yes] (the Left Select key) to
resume printing.
Canceling of Jobs
For canceling jobs, refer to Canceling Jobs on page 3-31.
Status: a b
*********************
2 Send Job Status
3 Store Job Status
[ Pause ]
1 Print Job Status
Print Job Status:
a b
*********************
0009 r maury’s data
0010
y aaaa
[ Pause ] [ Menu ]
0008 r Copy r
Pausing:
a b
*********************
0009 r maury’s data s
0010
y aaaa s
[ Resume ] [ Menu ]
0008 r Copy s
Resume paused jobs.
Are you sure?
[ Yes ] [ No ]