4
FAX Operation (Advanced)
4-21
Settings for Memory Forwarding from Embedded Web Server (Forward)
You can use Embedded Web Server on a computer connected to the network to specify the memory forwarding
settings on this machine.
Refer to the machine’s Operation Guide for information on the network settings.
Accessing Embedded Web Server
1 Open the web browser.
2 In the Address or Location bar, enter the machine’s IP
address as the URL, e.g. http://192.168.48.21/. The web
page displays basic information about the machine and
Embedded Web Server as well as the current status of
the machine.
3 Select a category from the navigation bar on the left to
view and set values for that particular category.
4 If administrator privileges have been enabled on
Embedded Web Server, remember to enter the correct
user name and password when trying to access the
relevant screens.
Setting Administrator Password restricts general users'
access to pages other than the Start page. For security
purposes, setting the Administrator password is highly
recommended. The default Administrator password is
factory-set as admin00.
To Next Page
