What to do if Olivetti d-COPIA 3013MF displays 'Error occurred'?
If your Olivetti All in One Printer displays 'Error occurred. Turn the power switch off and on', a system error has occurred. Turn the power switch off and on.
Why are documents printed improperly from my Olivetti d-COPIA 3013MF All in One Printer?
If documents are printed improperly from your Olivetti All in One Printer, the application software settings at the PC may not be set properly. Check that the printing system driver and application software settings are set properly.
What does 'Incorrect ID' mean on Olivetti All in One Printer?
If your Olivetti All in One Printer displays 'Incorrect ID', the user ID entered for a private job is not correct. Check the user ID that you specified on the printer driver.
What to do if Olivetti d-COPIA 3013MF displays 'Toner is running out'?
If your Olivetti All in One Printer displays the message 'Toner is running out', prepare the toner container.
Why cannot I print with USB memory on my Olivetti d-COPIA 3013MF?
If your Olivetti All in One Printer cannot print with USB memory, check that the USB memory is securely plugged into the machine. If the USB host is blocked, select Unblock in the USB host settings.
Why is the image shrunk when displaying an image sent from Olivetti d-COPIA 3013MF on PC?
If, when displaying an image sent from your Olivetti All in One Printer on the PC, the image size is shrunk vertically or horizontally, you may have selected 200×100dpi Normal or 200×400dpi Super Fine for the scan resolution. Select a scan resolution other than 200 × 100dpi Normal or 200 × 400dpi Super Fine when sending an image.
What does 'Unknown toner Installed' mean on Olivetti All in One Printer?
If your Olivetti All in One Printer displays 'Unknown toner Installed', the installed toner container's regional specification may not match the machine's. Install the specified container.
Why does my Olivetti d-COPIA 3013MF paper often jam?
Paper jams in your Olivetti All in One Printer can occur due to several reasons. Ensure the paper is loaded correctly. If the paper is of supported type and in good condition, try removing the paper, turning it over, and reloading it. Replace the paper with new paper if it is curled, folded, or wrinkled. Finally, remove any loose scraps or jammed paper from the machine.
How to fix moire pattern on Olivetti d-COPIA 3013MF All in One Printer copies?
If copies from your Olivetti All in One Printer have a moire pattern, and the original is a printed photograph, set the image quality to [Photo].
Why is the top edge or back of the paper dirty on my Olivetti All in One Printer prints?
If the top edge or back of the paper is dirty when printed from your Olivetti All in One Printer, the inside of the machine may be dirty. Clean the inside of the machine.
General| Brand | Olivetti |
|---|---|
| Model | d-COPIA 3013MF |
| Category | All in One Printer |
| Language | English |
To Next Page