To Next PageTo Next PageWhy are printouts from my Olivetti d-COPIA 3014MF fuzzy?
If the printouts from your Olivetti All in One Printer are fuzzy, the machine may be used in very humid conditions. Use it in a location that has suitable humidity.
How to fix Olivetti d-COPIA 3014MF if it cannot feed originals?
If your Olivetti All in One Printer cannot feed originals, ensure that the originals are placed correctly in the document processor. Align the original width guides securely before placing the originals.
Why do vertical streaks appear on prints from Olivetti d-COPIA 3014MF?
If vertical streaks appear on prints from your Olivetti All in One Printer, the slit glass may be dirty. Clean the slit glass. The inside of the machine may also be dirty; check the toner container and replace it if necessary.
Why are printouts from my Olivetti All in One Printer wrinkled or curled?
If the printouts from your Olivetti All in One Printer are wrinkled or curled, the paper may be damp. Replace the paper with new paper.
What to do if pressing Start key does not produce copies on Olivetti All in One Printer?
If pressing the Start key on your Olivetti All in One Printer does not produce copies, the machine might be in Sleep mode. Press any key on the operation panel to recover the machine from Sleep mode. The machine will be ready to copy within 15 seconds.
What causes paper jams in Olivetti All in One Printer?
Paper jams in your Olivetti All in One Printer can occur if the paper is not loaded correctly. Also, paper that is not of the supported type or not in good condition can cause jams; try removing the paper, turning it over, and reloading it. Replace the paper with new paper if it is curled, folded, or wrinkled. Remove any jammed paper.
Why are images skewed on my Olivetti All in One Printer?
If the images from your Olivetti All in One Printer are skewed, check if the originals are placed correctly. When placing originals on the platen, align them with the slit glass. When placing originals in the document processor, align the original width guides securely before placing the originals. Also, check the position of the paper width guides to ensure the paper is loaded correctly.
Why are my Olivetti d-COPIA 3014MF All in One Printer printouts too dark?
If the printouts from your Olivetti All in One Printer are too dark, check if the machine is in Auto Density mode and set the correct density level. If the machine is in Manual Density mode, select the correct density level.
What to do if Olivetti All in One Printer does not recognize USB memory?
If your Olivetti All in One Printer does not recognize the USB memory, check that the USB memory is securely plugged into the machine. Also, check if the USB host is blocked and, if so, select Unblock in the USB host settings.
How to clean Olivetti All in One Printer if printouts are dirty?
If the printouts from your Olivetti All in One Printer are dirty, the platen or the document processor may be dirty. Clean the platen or the document processor.
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Print Technology | Laser |
| Print Speed (Black) | 30 ppm |
| Print Resolution | Up to 1200 x 1200 dpi |
| Copy Speed (Black) | 30 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Type | Flatbed, ADF |
| Scan Resolution | 600 x 600 dpi |
| Fax Transmission Speed | 33.6 Kbps |
| Max Paper Size | A4 |
| Operating System Compatibility | Windows, Mac OS, Linux |
| Duplex Printing | Yes |
| Automatic Document Feeder Capacity | 50 sheets |
| Display | LCD |
| Type | All-in-One Printer |
| Paper Capacity | 250 sheets |
| Connectivity | USB, Ethernet |
