How to clean dirt on paper from Olivetti Printer?
If you notice dirt on the top edge or back of the paper when using your Olivetti Printer, if the problem continues after printing several pages, clean the registration roller. If the problem persists after cleaning, call for service.
What to do when Olivetti PG L2130 Printer toner is running low?
If the toner is running low in your Olivetti Printer, have a new toner container ready for replacement.
How to replace toner on Olivetti PG L2130 Printer?
If the toner has run out in your Olivetti Printer, replace it with a new toner container and clean the inside of the printer after replacement.
What causes dropouts and stray dots on Olivetti PG L2130 prints?
If your Olivetti Printer displays 'Dropouts, stray dots', it is possible that the drum or developer unit may be damaged. If the problem persists after printing several pages, call for service.
Why doesn't the toner container match my Olivetti PG L2130?
If the installed toner container's regional specification does not match the printer's, install the specified toner container for your Olivetti Printer.
How to resolve insufficient memory error on Olivetti Printer?
If you're unable to print due to insufficient memory on your Olivetti Printer, add the expansion memory to the printer.
General| Print Speed | 30 ppm |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Connectivity | USB 2.0, Ethernet |
| Paper Capacity / Paper Input (Standard) | 250 sheets |
| Print Technology | Laser |
| Print Speed (Black) | 30 ppm |
| Processor Speed | 600 MHz |
| Paper Output | 150 sheets |
| Paper Width | 76.2 - 216 mm |
| Type | Laser |
| Duplex Printing | Yes |
| Supported Paper Sizes | A4, A5, B5, Letter, Legal |
| Noise Level | 50 dB |
| Printing Method | Electrophotographic |
To Next Page
