6-9
Setup and Registration (System Menu) > System Menu
Print Quality Set the Print Quality.
KIR Mode The machine is equipped with the smoothing function, which realizes an excellent printing of
about 9600 dpi (600 dpi × 15 gradation) × 600 dpi.
Value: Off, On
EcoPrint Mode EcoPrint conserves toner when printing. This is recommended for test copies where faded
printing is not a problem.
Values: Off, On
Resolution Set the resolution used for printing.
Value: Fine 1200 mode, Fast 1200 mode, 600 dpi, 300 dpi
NOTE
Settings that are received from the Printing S
ystem Driver have priority over the operation panel settings.
Print Density Adjust print density. Adjustment can be made in 5 levels.
Value: 01 to 05
Page Setting You can set print preferences such as the number of pages and print orientation.
Copies Set the default number of copies, from 1 to 999.
Value: 1 to 999 copies
Orientation You can select portrait (upright) or landscape (sideways) page orientation.
Value: Portrait, Landscape
Wide A4 Turn this to on to increase the maximum number of characters that can be printed in a line for
an A4 page (78 characters at 10 pitch) and Letter size page (80 characters at 10 pitch). This
setting is only effective in PCL 6 emulation.
Value: Off, On
XPS FitTo Page Set the default value for the XPS fit to page function.
Value: Off, On
TIFF/JPEG Size Select the image size (resolution) when printing JPEG or TIFF file.
Value: Paper Size, Image Resolution, Print Resolution
User Name
Set whether the user name set in the Printing Sys
tem Driver is displayed.
Value: Off, On
Job Name
Set whether the job name set in the Printing System Driver is displayed.
Value:
Off, Job Name, Job No.+Job Name, Job Name+Job No.
Item Description
To Next Page
Loading...
