To Next PageTo Next PageWhat to do if the Olympus Switch lamp will not light?
If the lamp of your Olympus Switch doesn't light, there could be several reasons. First, ensure the lamp housing connector is properly connected. Second, check that the transmitted/reflected light switch on the microscope is set to the correct position. Third, verify the lamp on-off switch of the microscope is set to ON. Finally, the lamp may be blown and need replacement.
Why ERR indicator blinks on Olympus Switch?
If the ERR (Error) indicator is blinking on your Olympus Switch, it means that the module corresponding to the indicator that is blinking simultaneously with ERR is not connected properly. Connect the motorized module of the simultaneously blinking indicator properly.
Why won't the lamp light on my Olympus BX-UCB Control Unit?
If the lamp on your Olympus Control Unit isn't lighting, several factors could be the cause: * The lamp housing connector might not be properly connected, so ensure it is. * The transmitted/reflected light switch on the microscope may be set incorrectly; adjust it to the desired position. * The lamp on-off switch of the microscope might be set to OFF; set it to ON. * The lamp itself may be blown, requiring replacement.
What does it mean when the ERR indicator is blinking on my Olympus BX-UCB Control Unit?
If the ERR indicator is blinking on your Olympus Control Unit, it means that the module corresponding to the indicator blinking simultaneously with ERR is not connected properly. To resolve this, connect the motorized module of the simultaneously blinking indicator properly.
Why aren't the hand switch buttons working on my Olympus BX-UCB?
If the hand switch buttons on your Olympus Control Unit aren't working or the indicators aren't lighting up, it could be due to an improper connection. Ensure the hand switch is properly connected.
General| Brand | Olympus |
|---|---|
| Model | BX-UCB |
| Category | Control Unit |
| Language | English |
Essential safety guidelines for operating the microscope system, including electrical safety.
Explanation of symbols used in the manual and on the equipment for safe operation.
Guidance on handling precision equipment and environmental conditions for use.
Detailed identification and description of the BX-UCB Control Box parts and connectors.
Identification of buttons, indicators, and accessories for the U-HSTR2 Hand Switch.
Instructions for powering on the BX-UCB Control Box and understanding its indicator LEDs.
Guidance on attaching indication stickers and using grouping panel sheets for the U-HSTR2 Hand Switch.
Configuration of DIP switches on the BX-UCB for selecting operational settings.
Technical details for the BX-UCB Control Box, including power, LEDs, and option slots.
Technical details for the U-HSTR2 Hand Switch, including button functions and operating environment.
Guidance on diagnosing and resolving common problems encountered with the microscope system.
Visual representation of how to assemble and connect the microscope system components.
Step-by-step instructions for connecting the hand switch cable and power cord.
