How to use the direct buttons
1
Basic operation
14
Basic functions can be easily operated using the direct buttons. Use the arrow pad
and i to make settings. Follow the buttons displayed on the screen to select and
make each setting.
How to set the flash mode using n is shown below.
1 Press n in shooting mode.
• The flash mode selection screen is displayed.
2 Press [\ to select a flash mode.
3 Press i.
• The camera is ready to shoot.
Using the direct buttons
FLASH MODE
AUTO
SELECT
GO
Current setting
Operating guide
FLASH MODE
AUTO
SELECT
GO
Selected setting
To Next Page
Loading...
