103
Single-frame reservation
7
Print setting (DPOF)
5 Select the appropriate item using
the arrow pad.
MORE : Sets the number of prints
and date/time.
→ Go to
Step 6.
SINGLE PRINT : Sets single-frame print.
The date/time settings
are not available. The print reservation is set. Return
to Step 4.
CANCEL : Cancels the reservation of the picture displayed on
the screen. "Resetting print reservation data"
(P.105)
END : Completes the print reservation.
→ Go to Step 11.
6 Press on the arrow pad
to select x (number of prints) or
(date/time), and press .
7 Perform each setting.
Set the number of prints
Press to set the desired number of prints,
and press .
If you want to continue to set the date/time
printing data, press to return to Step 6.
: Increases the number.
: Decreases the number.
To Next Page
Loading...
