127
Troubleshooting
9
Miscellaneous
Miscellaneous
The life of the batteries is short.
Possible cause Corrective action Ref. Page
The camera is being
used in a cold area.
The battery performance decreases in cold
areas. Protect the camera from the cold by
using a cold protection gear, or by putting it
inside your clothes.
–
The correct battery level
is not displayed.
Batteries can run out without a warning
message when the amount of power
consumed increases considerably. Replace
with new batteries.
P.15
The printer fails to connect.
Possible cause Corrective action Ref. Page
PC was selected on the
monitor after connecting
to the printer with a USB
cable.
Turn the camera off and start again from step
1 of “Connecting the camera to a printer”.
P.108
The printer does not
support PictBridge.
Refer to the printer’s instruction manual or
contact the manufacturer.
–
To Next Page
Loading...
