22
1
Getting started
Power on/off
When shooting pictures (Shooting mode)
Power on: Slide the power switch to , pressing and holding the
lock button.
The camera turns on in the shooting mode. The lens
extends and the subject is displayed on the monitor.
Power off: Slide the power switch to OFF.
The camera turns off. (The monitor also turns off.)
• Even if the monitor is turned off, the battery power is
consumed unless the power switch is located at OFF.
TIPS
• To save battery power, the camera automatically enters the sleep mode
and stops operating if not used for 3 minutes. If the monitor is on, it will
automatically turn off. The camera activates again as soon as you lightly
press the shutter button or zoom lever. Whenever possible, turn the
camera off when you do not intend to take any pictures for a while.
Power switch
Lock button
Power switch
To Next Page
Loading...
