20
1
Inserting a card
Getting started
1 Make sure that the power switch
is located at OFF.
2 Open the card cover.
3 Face the card the correct way and
insert it into the card slot as
shown in the illustration.
• Insert the card while keeping it straight.
• The card stops with a click when it is
inserted all the way.
• Inserting the card the wrong way or at an
angle could damage the contact area or
cause the card to jam.
• If the card is not inserted all the way,
data may not be written to the card.
4 Close the card cover securely.
Power switch
Card cover
The position of the card
inserted correctly
Notch
Contact area
To Next Page
Loading...
