28
1
Setting the date and time
Getting started
6 Press to select one of the
following date formats: Y-M-D
(Year/Month/Day), M-D-Y (Month/
Day/Year), D-M-Y (Day/Month/Year).
Then press .
• Move to the year setting.
• The following steps show the procedure
used when the date and time settings are
set to Y-M-D.
7 Press to set the year, and
press to move to the month
setting.
• To move back to the previous setting,
press .
• The first two digits of the year are fixed.
8 Repeat this procedure until the
date and time are completely set.
• The camera only displays the time in 24-hour time system ("2. p.m."
would be "14:00").
9 Press .
• For a more accurate setting, press
when the time signal hits 00 seconds.
The clock starts when you press the
button.
10 Slide the power switch to OFF.
OK button
Power switch
To Next Page
Loading...
