105
Playback
7
7 Playback
Viewing still pictures
1 Set the mode dial to q (playback
mode) and set the power switch to
ON.
g“Power on/off” (P.24)
• The last picture taken appears in the
monitor. (Single-frame playback)
2 Use the arrow pad to play back other pictures.
• If the camera is not used for over 3 minutes, the camera enters the
sleep mode and the monitor turns off.
Mode dial
Power switch
Mode dial
Arrow pad
Displays the next
picture.
Displays the previous
picture.
Jumps to the picture 10 frames back.
Jumps to the picture 10 frames ahead.
Note
To Next Page
Loading...
