116
7
Playback
Playback on a TV
Use the video cable provided with the camera to play back recorded images
on your TV. You can play back both still pictures and movies on your TV.
1 Make sure that the TV and camera are turned off. Connect
the VIDEO OUT jack on the camera to the Video input
terminal on the TV using the video cable.
2 Turn the TV on and set it to the video input mode.
• For details of switching to video input, refer to your TV’s instruction
manual.
3 Set the mode dial to q and turn the camera on.
• The last picture taken is displayed on the TV. Use the arrow pad to
select the picture you want to display.
• The close-up playback, index display and slideshow functions can also
be used on a TV screen.
• Make sure that the camera’s video output signal type is the same as
the TV’s video signal type. g“VIDEO OUT – Selecting the video
signal type” (P.143)
• The camera’s monitor turns off automatically when the video cable
is connected to the camera.
• Be sure to use the video cable provided to connect the camera to
the TV.
• The picture may appear off-center on the TV screen.
• When pictures are compressed in order to fit the entire picture on the
TV screen, a black frame appears around the picture. If the picture is
output to a video printer via the TV, the black frame may be printed.
Mode dial
Connect to the TV’s video input (yellow)
terminal.
Video cable
VIDEO OUT jack
Connector cover
Note
To Next Page
Loading...
