85
Sequential shooting
Advanced shooting
5
3 Select the number of shots. Press ac to select ×3 or ×5,
then press e.
•Press e repeatedly until the menu disappears.
4 Take the picture.
• Press the shutter button fully and keep it pressed to shoot the preset
number of pictures. You can stop shooting at any time by releasing the
shutter button.
• Sequential shooting (j, k, BKT) is not possible in the
following situations:
When record mode is set to TIFF.
When NOISE REDUCTION is set to ON.
• Auto bracketing is not possible in M mode.
• The slowest shutter speed is set to 1/30 sec. for sequential shooting
and AF sequential shooting. The flash fires if set to auto-flash mode.
• The built-in flash and external flash do not fire in BKT mode.
• If the battery power is low and the battery check lights during
sequential shooting, shooting stops and the camera starts saving
the pictures you have taken. Whether or not all of the shots are
saved depends on how much battery power remains.
• If there is not enough space available on the card for the number of
frames you have set during auto bracketing, you cannot continue
shooting.
Note
To Next Page
Loading...
