Olympus CAMEDIA C-60 Zoom - If the Card Is Not Recognized (Card Check)

23
1
Getting started
Power on/off
If the card is not recognized (Card check)
NO CARD
TIPS
There is no card in the camera or the card is
not locked into place.
T Insert a card. If a card is already inserted,
remove it and insert it again.
There is a problem with the card.
T Format the card, if this does not correct the
problem, use a different card.
The card cannot be recognized with this
camera system.
T Press to select POWER OFF, then
press . Replace the card with a new one.
T Format the card.
1 Press to select FORMAT, then
press .
The FORMAT screen appears.
2 Press to select YES, then press
to start formatting.
When formatting is complete, the camera
is ready for shooting.
CARD ERROR
Indications
CARD SETUP
POWER OFF
FORMAT
FORMAFORMAT
YES
NO
CAUTION ERASING ALL
• All data stored on the card is erased when the card is formatted.
Note
When the power is turned on, the camera checks the card automatically. If
there is no card in the camera or a card that is not supported by this camera
is inserted, the following screen is displayed.