Adjustable range
: Light emission is increased by a 1/3 EV each time you press the button.
: Light emission is decreased by a 1/3 EV each time you press the button.
(EV: Exposure Value)
1
In the top menu, select MODE MENU T
CAMERA T .
~ “How to use the menus” (P. 28)
2
Press to adjust, then press .
● Press again to exit the menu.
Factory default setting: ±0
Flash intensity control
You can adjust the amount of light emitted by the flash.
In some situations, you may get better results by adjusting light emission.
Examples include small subjects, distant backgrounds, or situations when
increased contrast is desired. This function is also useful for adjusting the
contrast of images.
• The flash adjustment effect may not be sufficient if the shutter speed
is too fast.
To Next Page
Loading...
