1
In the top menu, select MODE MENU T
PICTURE T SHARPNESS, and press .
~ “How to use the menus” (P. 28)
2
Press to adjust the sharpness
between +2 and –2.
● To increase the sharpness (+) : The image
contours are emphasized, making the image
appear sharper and more vivid. Use this
setting when you want to print pictures.
To reduce the sharpness (–) : The image
contours are softened. Use this setting when
you want to edit images on a PC.
● When you have finished setting the
sharpness, press . Press again to
exit the menu.
Adjusts towards –
Adjusts towards +
• If you adjust the sharpness too far towards +, noise may become
noticeable in the picture.
• Set white balance to AUTO for normal shooting.
• White balance may not be effective under certain light sources.
• After setting a white balance other than AUTO, play back the picture
and check the colors on the monitor.
• When the flash is fired with a white balance setting other than AUTO,
colors may appear different in the resulting picture from the colors
you see on the monitor.
To Next Page
Loading...
