150
5
SETUP (still pictures & movies) (Cont.)
ALL RESET
Use this function to save settings (OFF), or to return to factory default settings (ON)
when the power is turned off.
See P.124 for further information.
Adjusts the beep sound on or off.
See P.126 for further information.
Adjusts the brightness of the Viewfinder and the
Monitor.
See P.129 for further information.
Sets the date and time.
See “Getting started (P.29)” or “Chart (P.122)” for details on setting.
By turning the Zoom lever to W in playback mode
(P.62), you can display multiple pictures at once.
Select the number of pictures displayed (4/9/16-
frames) referring to the chart on P. 149, then press
.
(
Index display)
(9-frames)
To Next Page
Loading...
