82
3
Metering the exposure of more than one point in the frame
— Multi-metering
Meters the brightness of the subject at up to 8 different points to set the optimal
exposure based on the average brightness. Useful with high-contrast subjects.
1
Set the Mode dial to P or A/S/M.
● For A/S/M, set the A or S mode.
2
Press the button to engage
the spot metering mode.
(macro/spot) button T P. 70
3
Set MULTI METERING to ON in the
Menu (Display the Top menu (P. 92)
T Display MODE MENU (P. 92) T
Display the CAMERA menu (P. 94)
T MULTI-METERING setting (P.
100)
4
Point the camera toward the
subject, then press the
button. A metering bar appears at
the bottom of the screen. (P. 83)
● Brightness meter readings are
ignored after the 9th reading.
Save the locked Multi-Metering exposure after shooting (AE memory)
After pressing the button as many times as required in step 4, hold it down
for more than 1 second. MEMO appears. When MEMO appears, the locked
exposure is memorized.
Cancel the locked Multi-Metering exposure
In step 4, hold down the button for more than 1 second to display MEMO .
Press it again and release it quickly. The Multi-Metering exposure is canceled.
OR
(The M mode is not available.)
(AE lock/Custom)/ (Rotation) button (Cont.)
5
Shoot.
~
Continued on next page
To Next Page
Loading...
