178
8
External flash (Cont.)
4
Press the (flash) switch on the
camera to open the main flash.
5
Press the (flash mode) button to
select the camera’s flash mode (P.
74).
Flash switch
● If close-up pictures are overexposed, try using the main flash by itself.
● When the main flash and the FL-40 are used together, the main flash is used as the
compensating light source. This means that if the amount of light from the FL-40 is
insufficient (beyond its working range), the resulting pictures may be underexposed.
Note:
First, do steps 1 – 3 of “Using both the main flash and the FL-40 external flash” (P. 177).
Using the FL-40 external flash by itself
4
Make sure that the main flash is
closed. If it opens at any time
during shooting, close it.
5
Press the button to select a flash
mode (P. 74).
Flash mode button
Flash
Flash mode button
To Next Page
Loading...
