171
7
Transferring images to a computer
— Downloading (Cont.)
Removing the card
Card access lamp
To avoid computer malfunctions, always do the following when removing the card. If a
malfunction occurs, disconnect the USB cable and re-connect it, and/or re-start your
personal computer.
Windows
1
Make sure the camera’s access lamp is off.
● If the card access lamp is blinking, wait until it
stops blinking.
2
Select the Drive icon (Removable Disk) on
“My Computer” and right-click to display
the menu.
3
Select “Eject” and left-click.
4
Open the card cover on the camera and
remove the card.
Macintosh
1
Make sure the camera’s access lamp is off.
● If the card access lamp is blinking, wait until it
stops blinking.
2
Drag and drop the “Untitled” Drive icon
onto the Trash on the desktop or select
“Special” — “Eject” on the menu.
3
Open the card cover on the camera and
remove the card.
To Next Page
Loading...
