166
7
Connecting directly to a computer by cable
(Cont.)
1
When the camera is turned on after
connecting it to a computer, a window at
right appears saying that the computer has
recognized the camera as a “New Device
(hardware)”.
2
Click on the “Next” button.
3
Confirm that “Search for the best driver for
your device (Recommended)” is selected,
then click on the “Next” button.
4
Place the software CD in the CD-ROM drive
and wait until the CD is recognized.
● If a window automatically appears on the left
appears automatically when the CD is ready,
click on the “Exit” button and erase the
window.
5
Remove the check marks next to “Floppy
disk drive” and “CD-ROM drive”, add one
next to “Specify a location”, and click on
the “Browse” button.
Installing a USB driver when using Windows 98/98SE
~
Continued on next page
To Next Page
Loading...
