34
2
There are 2 steps when releasing the Shutter.
Practice well before actually taking pictures.
1
Press the shutter button halfway.
● When focus and exposure are locked, the AF
confirmation mark lights. If they are not locked,
the AF confirmation mark blinks.
● Use focus lock (P. 59) when the subject is not
within the AF target mark.
2
Press the shutter button fully to release the
shutter and take a picture.
● The card access lamp blinks while the picture
is being recorded.
Using the shutter release correctly
—Pressing fully/halfway
Press fully
Press halfway
Shutter button
AF confirmation mark
AF target mark
● Press the shutter button gently using the ball of your finger. If it is pressed hard, the
camera may move and pictures may come out blurred.
Note:
Shutter button
Card access lamp
To Next Page
Loading...
