55
3
Mode dial (Cont.)
Recorded images and sound can be displayed on TV with the AV cable.
Make sure that the TV and camera power are off before connecting.
AV cable
Connect to the A/V OUT jack (black).
Connect the AV cable to the TV's
video input (yellow) and audio input
(white) connectors.
● The monitor turns off automatically when connected to a TV.
● The image may appear off-center on the TV screen. This is due to the TV's
adjustment settings.
● Your TV may produce a black frame around the picture. This is normal.
● The optional AC adapter is recommended when using the camera with a TV.
Note:
In the single-frame playback mode, the following playback functions can be
used. With Quick View (P. 38, 42), these are also available.
Displaying multiple pictures simultaneously T Index display (P. 62)
Enlarging a picture T Close-up playback (P. 61)
Displaying multiple pictures automatically in sequence T Slide-show (P. 138)
Rotating a picture with the camera held in the vertical position T Picture rotation (P.
85)
After connection
1 Turn on the camera and TV and select the video input on the TV. For video
input selection, please refer to your TV's instruction manual.
2 Set the Mode dial to .
3 Select the image to be displayed using the Arrow pad.
● The selected image will be displayed on the TV.
To Next Page
Loading...
