Copying pictures
114
6
Playback
Top menu [MODE MENU] [SETUP] [VIDEO OUT] [NTSC] / [PAL]
g“Menus” (P. 23)
• The factory default setting varies depending on the region where you purchased
this camera.
This function lets you copy pictures to and from the xD-Picture Card and
CompactFlash or Microdrive. This menu can be selected if both cards are
inserted.
The selected card is the copying source. You can change the copying
source by pressing the CF/xD (card) button. g“Switching cards” (P. 40)
ALL Copies all the pictures on the card.
SELECT Copies only the selected picture.
Top menu [MODE MENU] [EDIT] [COPY] g“Menus” (P. 23)
• Follow the procedure below when a movie is selected and the menu is displayed.
Top menu [COPY]
1 Select [ALL] or [SELECT], and press d.
(If you choose [ALL]
A confirmation screen asking if you want to copy
the pictures is displayed. Select [YES], and press
Z.
• The pictures are copied and the menu is
exited.
• To quit the copy function, select [NO] and
press Z.
TIPS
TV video signal types & main regions
Check the video signal type before connecting the camera to the TV.
NTSC North America, Taiwan, Korea
PAL European countries, China
Mode dial
Copying pictures
Mode dial
COPY
YES
NO
GO
OK
SELECT
To Next Page
Loading...
