Olympus CAMEDIA C-7070 Wide Zoom - Setting the Date and Time

Settings
7
123
Setting the date and time
This function lets you set the date and time.
The date and time is saved with each
image, and is used in the file name.
Top menu [MODE MENU] [SETUP] [X] g“Menus” (P. 23)
1 Select one of the following date
formats: [Y-M-D] (Year/Month/Day),
[M-D-Y] (Month/Day/Year), [D-M-Y]
(Day/Month/Year), and press
d
.
• Move to the year setting.
• The following steps show the procedure
used when the date and time settings
are set to [Y-M-D].
2 Press ac to set the year, and
press d to move to the month
setting.
• To move back to the previous setting,
press b.
• The first two digits of the year are fixed.
3 Repeat this procedure until the
date and time are completely set.
• The time is displayed in the 24-hour format. Consequently, 2 p.m. is
displayed as 14:00.
4 Press Z.
• For a more accurate setting, press Z when the time signal hits 00 seconds.
Note
• The date and time settings will be returned to the factory default settings if the
camera is left without the battery for approximately 3 days. The settings will be
canceled more quickly if the battery was only loaded in the camera for a short
time before being removed. Before taking important pictures, check that the
date and time settings are correct.
• If the date and time setting is canceled, a warning is displayed on the monitor
the next time the camera is turned on. g“Error codes” (P. 174)
’05
05
.
.
02
02
. 16
16
15
15
: 30
30
30
30
100
100
- 0030
0030
HQ
HQ
Mode dial
2004
.
01 01
00 00
:
.
YMD
GO
OK
SET SELECT
2004
.
01 01
00 00
:
.
GO
OK
SET SELECT