Displaying camera images on a computer
168
9
Connecting the camera to a computer
(To disconnect the camera
You can disconnect the camera after downloading the images to your computer.
1 Make sure that the card access
lamp on the camera is off.
2 Make the following preparations
for disconnecting the USB
cable.
Windows 98SE
1 Double-click the “My Computer” icon
and right-click the “Removable Disk”
icon to display the menu.
2 Click “Eject” on the menu.
Windows Me/2000/XP
1 Click the “Unplug or Eject Hardware” icon
in the system tray.
2 Click the message that is displayed.
3 When a message is displayed saying
that the hardware can be ejected
safely, click “OK”.
Note
• The card access lamp blinks while downloading images. Do not do any of the
following while the lamp is blinking.
• Open the card cover.
• Remove the battery.
• Connect or disconnect the AC adapter.
Card access lamp
To Next Page
Loading...
