Flash shooting
51
Basic shooting functions
3
Basic shooting functions
You can adjust the amount of light emitted by the flash.
In some situations, you may get better results by adjusting the light emission.
Examples include small subjects, distant backgrounds, or situations when increased
contrast is desired.
1 Turn the control dial while
pressing the # and F buttons to
make adjustments.
g“Direct buttons” (P. 16)
2 Press the # and F buttons
simultaneously.
There are 3 settings to choose from when you select [#SLOW] with the # button.
1 Press the # button, and turn the control dial. Select
[#SLOW], and press Z.
g“Direct buttons” (P. 16)
Flash intensity control
TIPS
• The flash intensity can be set in [1/3EV] steps or [1/2EV] steps.
g“Exposure steps” (P. 122)
Note
• The flash adjustment effect may not be sufficient if the shutter speed is faster than
1/300.
• When [DIAL] is set to [CUSTOM1], press the # button, press Z, and select w from
the menu that is displayed.
Slow synchronization
Mode dial
+ 2.0
OK
SET
Mode dial
To Next Page
Loading...
