Focusing applications
66
4
Advanced shooting functions
2 Press the AF/&/MF button, and
use the arrow pad to move the AF
target mark to where you want to
focus.
• The AF target mark moves using the
arrow pad only when the camera is set
to [AF], [&] or [%].
3 Take the picture.
• To return the AF target mark to the start position (center), press Z in the
screen shown in Step 2.
This function enables you to focus on dark subjects
with the auto focus.
ON (factory default setting)
When you press the shutter button
halfway, the AF illuminator lights
automatically to illuminate the subject.
OFF The AF illuminator does not light.
Top menu [MODE MENU] [SETUP] [AF ILLUMINATOR] [ON] /
[OFF] g“Menus” (P. 23)
Note
• The AF target mark cannot move when [DIGITAL ZOOM] is set to [ON].
• The AF target mark returns to the center position when the power is turned off
or the mode dial is operated.
AF illuminator
Note
• When taking close-ups at less than 80 cm (2.6 ft.), the AF illuminator lights but
the subject may not be in focus.
MOVE
CANCEL
F2.8
To Next Page
Loading...
