Troubleshooting
182
10
Appendix
(When the camera is connected to a computer or printer
Possible cause Corrective action
Ref.
page
The printer fails to connect.
[USB] is set to [PC]. Set [USB] to [PRINT]. P. 142
The printer does not
support PictBridge.
Refer to the printer’s instruction manual or
contact the manufacturer.
–
The camera is not recognized by the computer.
The USB driver has not
been installed.
Install OLYMPUS Master. P. 161
The camera has not
been turned on.
Set the mode dial to q, then turn the power
switch to ON.
P. 13
To Next Page
Loading...
