Selecting the flash
53
Basic shooting functions
3
Basic shooting functions
1 Slide the shoe cover off in the
direction of the arrow and
attach the external flash.
• For instructions on how to attach the
flash, refer to the manual for the
external flash.
• Keep the shoe cover in a safe place to
prevent it getting lost, and replace it
on the camera when you have
finished using the external flash.
2
Press the
#
button and press
Z
.
g“Direct buttons” (P. 16)
3
From [
Q
FLASH], select
[IN+
Q
] or [
Q
], and press
Z
.
IN+Q: To use the external flash
together with the built-in flash
Q : To use the external flash only
4 Turn on the external flash.
• Set the mode dial to TTL-AUTO.
• Be sure to attach the flash to the camera before turning the flash on.
5 Press the # button, and turn the control dial. Select the flash
mode, and press the # button.
g“Flash shooting” (P. 47)
Shoe cover
Hot shoe
SLAVE
FLASH MODE
FLASH
SLOW
SELECT GO
OK
IN+
To Next Page
Loading...
