White balance
Advanced shooting functions
4
77
• You can select [WB] from the shortcut menu in P, A, S, M, r, and f
modes.
1 Select [YES], and press d.
2 With the [V ONE TOUCH WB]
screen displayed, point the
camera at a sheet of white paper.
• Position the paper so that it fills the
screen, making sure there are no
shadows.
3 Press Z.
• The new white balance is set.
Note
• When setting the white balance by pointing the camera at a sheet of white
paper, the correct setting may not be obtained if the light reflected by the paper
is too bright or too dark.
• White balance may not be effective under some special light sources.
• When using a white balance other than [AUTO], play back the picture to check
the colors on the monitor.
• When the flash is fired with a white balance setting other than [AUTO], colors
may appear different in the resulting picture from the colors you see on the
monitor.
YES
SET
RED BLUE
GO
OK
SET
SELECT
ONE TOUCH WB
GO
To Next Page
Loading...
