112
8
Connecting to a computer
Connecting the camera to a computer
Use the USB cable provided with the camera to connect the camera to your
computer.
1 Make sure the camera is turned
off.
• The monitor is off.
• The green lamp and the orange lamp
on the camera are off.
• The lens is not extended.
2 Plug the USB cable into the USB port on the computer.
• Refer to your computer’s instruction manual to locate the position of the
USB port.
3 Plug the other end of the USB
cable into the camera’s USB
connector.
• The camera turns on, and the green
lamp on the camera lights.
• The monitor turns on and the
selection screen for the USB
connection is displayed.
4 Press to select [PC], and
press .
Orange lamp
Green lamp
Monitor
Connector cover
USB connector
To Next Page
Loading...
