74
4
Playback
Erasing pictures
This function enables the camera to erase the recorded pictures. The “single-
frame erase” function erases only the current frame on the screen. The “all-
frame erase” function erases all frames stored in the internal memory or on
the card.
• To erase the pictures stored in the internal memory, remove the card first.
• To erase the pictures stored on the card, you should insert the card first.
• You cannot erase pictures that are protecte. Cancel the protection
before erasing such pictures.
• Once erased, pictures cannot be restored. Be careful not to accidentally
erase pictures you want to keep. "Protecting pictures" (P.73)
Single-frame erase
1 Press the power switch to turn the
camera on, and press .
• Playback mode is set.
• The green lamp on the camera lights.
2 Use the arrow pad to display the
picture you want to erase.
"Viewing still pictures" (P.62)
3 Press .
4 Press to select [YES], and
press .
• The picture is erased and the menu is
closed.
Note
Erase button ( )
OK button
Arrow pad
Playback button ( )
Power switch
To Next Page
Loading...
