Olympus CAMEDIA D-535 ZOOM - Useful Functions; Reset Settings

76
5
Useful functions
5 Useful functions
RESET-Resetting the settings to the default
The camera retains the changed settings even if the power is turned off. To
reset the settings to the factory default setting, use the RESET function. The
settings affected by the RESET function are listed on the next page.
Example : After you set [ ] to [SQ1], using the RESET function reset it to
its default, [HQ].
1 Press the power switch.
• The camera turns on in the shooting
mode.
• The lens extends and the monitor turns
on.
• The orange lamp lights.
2 Press ( ).
3 Press to select [RESET], and
press .
• Settings are reset to the factory default
setting.
Arrow pad
Power switch
OK button
Reset button
(RESET)