Olympus CH10 User Manual

CH10/CH20 C. DISASSEMBLY AND ASSEMBLY PROCEDURES
C-9
No. Parts name Screw Grease Adhesive Remarks
•
BODY AB3X8SA (*1)
2 pcs.
OT1028 Apply adhesive on the assembly
surface for lateral guide-1ˆ.
‚
CLIP HOLDER 3PUK2X8SA (*2)
3 pcs.
OT1131 Apply adhesive on the screw head.
Clearance between the stage and the
clip holder: 0.2 - 0.7 mm
ƒ
SPACER Mount the spacer with the round edge
side faced downwards.
„
CLIP CSK3X8SA (*3) OT2008 Apply grease on the contact surface
with the clip holder ‚.
…
NUT OT2008 Apply grease on the contact surface
with the clip holder ‚.
†
SPRING OT2008 Clip working force: 1.0 - 1.5N {100 -
150 g}
‡
LATERAL
GUIDE-3
3PUK2. 6X10SA (*4)
3 pcs.
SP1.6X4UO (*5)
PSTB1. 7X3SA (*6) 2
pcs.
OT1131 Apply adhesive on the screw head.
ˆ
LATERAL
GUIDE-1
PSTB1. 7X3SA (*7) 2
pcs.
OT2008 Apply grease on the fitting surface of
wire guide
±
15
 thinly.
‰
WIRE GUIDE
(2 pcs.)
OT2008
±
10 CASING B3SO (*9) 6 pcs. OT2008 Apply grease on the balls.
±
11 WIRE GUIDE
(2 pcs.)
OT2008
±
12 LATERAL
GUIDE-2
PSTB1. 7X3SA (*8) 4
pcs.
Apply grease on the wire guide fitting
surface thinly.
Rotation force at assembling the X/Y-
knob: 0.2 - 0.98N {20 - 100 g}
±
13 WIRE GUIDE
(2 pcs.)
OT2008
±
14 CASING B3SO (*10) 6 pcs. OT2008 Apply grease on the balls.
±
15 WIRE GUIDE
(2 pcs.)
OT2008
±
16 X-RACK 3PUK2X6SA (*11)
2 pcs.
HWB2SA (*12) 2 pcs.
OT1131 Apply adhesive on the screw head.
±
17 SPRING

Olympus CH10 Specifications

General

Brand	Olympus
Model	CH10
Category	Microscope
Language	English