Exposure is manually adjustable.
In addition to automatic exposure, you can also adjust it
manually by +/– 2 (0.5 step). Adjust + when the subject is
mostly bright. Adjust – when the subject is mostly dark.
How to adjust:
1 Press the Menu button in the Record mode, and select
Exposure compensation.
2 Move the arrow with the +/– buttons. Press the OK button
to confirm the adjustment.
● Press the Menu button to cancel the setting and go to the
next setting menu.
● The exposure mark appears on the control panel.
● The adjustment is canceled when the lens barrier is closed.
◆ Although the brightness of the LCD monitor can
be changed with the exposure compensation, it
may not appear to change when the subject is
mostly dark. In such a case, display the recorded
picture on the LCD monitor to check its
brightness.
◆ The exposure compensation may not work
properly when shooting with the flash.
Note:
Menu button
Touche de menu
Botón de menú
+/– buttons
Touches (+/–)
Botones +/–
LCD Monitor
Écran ACL
Monitor LCD
OK button
Touche OK
Botón OK
To Next Page
Loading...
