This function works when the lens barrier is closed.
1 Display a picture, then press the Menu button.
2 Press the – button to select All-Frame erase .
● Press the Menu button to cancel.
3 Press the OK button to erase all pictures.
● The camera makes a short single beep and the All-Frame
Erase indicator starts moving to the right.
4 All pictures are erased after a few seconds. The blue
background display will appear on the LCD monitor.
● If there are any protected pictures, they will not be erased
and the protected picture last taken will be displayed when
the erasing operation is completed.
● All-Frame Erase is also available in the Index-Display
mode. (p. 134)
Caution:
◆ Be careful not to erase important picture data by
mistake as it cannot be retrieved.
◆ Never open the card cover, eject the card, remove the
batteries, or pull the plug while erasing pictures. It
may destroy the data in the card.
◆ Do not press the Erase button while an image is
being loaded onto the LCD.
ALL-FRAME ERASE
Menu button
Touche de menu
Botón de menú
+/– buttons
Touches (+/–)
Botones +/–
LCD Monitor
Écran ACL
Monitor LCD
OK button
Touche OK
Botón OK
To Next Page
Loading...
